Front Suspension for 2006 Chrysler Pacifica
No.
Part # / Description / Price
Price
13
MSRP $18.70
$13.49
15
Brake Hub And Bearing 
Mopar
Mopar Notes: Engines: 3.5L V6 24V MPI ENGINE. 3.8L V6 OHV ENGINE.
Description: With Sensor.
16
Hub Stud Mopar
Mopar Notes: Engines: 3.5L V6 24V MPI ENGINE. 3.8L V6 OHV ENGINE.
Description: Stud with Flat Side use 6503288. M12x1.50x45.88. [brb or bre].
MSRP $16.10
$11.62
MSRP $16.10
$11.62
17
Hex Head Screw And Washer Mopar
Mopar Notes: Engines: 3.5L V6 24V MPI ENGINE. 3.8L V6 OHV ENGINE.
Description: Starter To Transmission. Engine Mount To Cylinder Block. Starter To Engine Block. Bearing to Knuckle. Y-Pipe To Exhaust Manifold. M10x1.50x65.00. Starter motor to engine.
MSRP $16.35
$11.86
MSRP $16.35
$11.86
19
Hex Nut And Washer Mopar
Mopar Notes: Engines: 3.5L V6 24V MPI ENGINE. 3.8L V6 OHV ENGINE.
Description: M12x1.25. Knuckle to LCA. Steering gear to tie rod end. Tie Rod Ends to Tie Rod. Strut to Strut Rod. Knuckle to Lower Control Arm.
MSRP $9.45
$6.78
MSRP $9.45
$6.78
21
Ball Joint Fitting Mopar
Mopar Notes: Engines: 3.5L V6 24V MPI ENGINE. 3.8L V6 OHV ENGINE.
Description: Zirc.
28
Bolt, Mounting Mopar
Mopar Notes: Engines: 3.5L V6 24V MPI ENGINE. 3.8L V6 OHV ENGINE.
Description: LCA to Axle. Lower Control Arm Mounting Front. Lwr control arm frt to cradle. LCA to Body.
29
Stabilizer Bar Link Mopar
Mopar Notes: Engines: 3.5L V6 24V MPI ENGINE. 3.8L V6 OHV ENGINE.
MSRP $98.35
$65.49
MSRP $98.35
$65.49
30
Hex Nut And Washer Mopar
Mopar Notes: Engines: 3.5L V6 24V MPI ENGINE. 3.8L V6 OHV ENGINE.
Description: M12x1.75. Link to Sway Bar. Use With Link Kit #68399868AD. Link to Strut. Front Engine Mount To Cradle. I-link to knuckle.
MSRP $7.60
$5.51
MSRP $7.60
$5.51
32
Hex Flange Head Bolt, Mounting Mopar
Mopar Notes: Engines: 3.5L V6 24V MPI ENGINE.
Description: Sway Bar Bracket to Axle. Sway Bar to Cradle. Sway Bar Retainer to Frame Mounting. Engine Mount to Cradle. Sway Bar Retainer to Axle. M10x1.50x35.00.
MSRP $10.55
$7.62
MSRP $10.55
$7.62
34
Hex Head Bolt, Mounting Mopar
Mopar Notes: Engines: 3.5L V6 24V MPI ENGINE.
Description: Heat Sheild To Engine Mount. Wiring Harness to Bracket. M6x1.00x11.00. Heat Shield to Mount. Clmn bridge to frt end. Size M4X0.7X16.5 Steering Wheel Module to Column. Engine Mount Heat Shield. Engine Mount Bracket To Cylinder Block. Ground Strap to Urea Tank Crossmember.
MSRP $6.00
$4.24
MSRP $6.00
$4.24
36
38
Camber Adjustment Bolt Kit Mopar
Mopar Description: Strut to Knuckle. 2 Per Vehicle. 2 Bolts Included in Each Kit. Only 2 Kits Needed. This Is A Repair Package For One Side, See Quanity. Use With Service Strut.
MSRP $112.00
$73.54
MSRP $112.00
$73.54
2 This part contains hazardous materials. Extra shipping costs apply.